Initial Commit - Copy from Altus Metrum AltOS
This commit is contained in:
98
doc/telegps-using.inc
Normal file
98
doc/telegps-using.inc
Normal file
@@ -0,0 +1,98 @@
|
||||
== Using TeleGPS Hardware
|
||||
|
||||
=== Hooking Up Lithium Polymer Batteries
|
||||
|
||||
TeleGPS has a two pin JST PH series connector to connect up
|
||||
a single-cell Lithium Polymer cell (3.7V nominal). You can
|
||||
purchase matching batteries from the Altus Metrum store, or
|
||||
other vendors, or you can make your own. Pin 1 of the
|
||||
connector is positive, pin 2 is negative. Spark Fun sells a
|
||||
cable with the connector attached, which they call a
|
||||
link:https://www.sparkfun.com/products/9914[JST Jumper 2 Wire Assembly]
|
||||
|
||||
|
||||
[WARNING]
|
||||
Many RC vendors also sell lithium polymer batteries with
|
||||
this same connector. All that we have found use the opposite
|
||||
polarity, and if you use them that way, you will damage or
|
||||
destroy TeleGPS.
|
||||
|
||||
=== On-board Data Recording
|
||||
|
||||
TeleGPS logs GPS data at a user-configurable
|
||||
rate. Data are logged to a 2MB on-board flash memory
|
||||
part, which can be partitioned into several
|
||||
equal-sized blocks, one for each flight. 64kB of this
|
||||
storage are reserved to hold configuration data,
|
||||
leaving 1984kB for flight data.
|
||||
|
||||
The on-board flash is partitioned into separate flight
|
||||
logs, each of a fixed maximum size. Increase the
|
||||
maximum size of each log and you reduce the number of
|
||||
flights that can be stored. Decrease the size and you
|
||||
can store more flights.
|
||||
|
||||
To compute the amount of space needed for a single
|
||||
log, you can divide the expected time (in seconds) by
|
||||
the sample period (by default, 1 second per sample)
|
||||
and then multiply the result by 32 bytes per
|
||||
sample. For instance, a sample period of 1 second and
|
||||
a flight lasting one hour will take 32 * 3600 = 115200
|
||||
bytes. TeleGPS does try to reduce log space used by
|
||||
not recording position information when it isn't
|
||||
moving, so actual space consumed may be less than
|
||||
this.
|
||||
|
||||
The default size allows for four flights of 496kB
|
||||
each, which provides over four hours of logging at 1
|
||||
sample per second.
|
||||
|
||||
TeleGPS will not overwrite existing flight data, so be
|
||||
sure to download flight data and erase it from the
|
||||
onboard flash before it fills up. TeleGPS will still
|
||||
report telemetry even if memory is full, so the only
|
||||
thing you will lose is the on-board data log.
|
||||
|
||||
=== LEDs
|
||||
|
||||
TeleGPS v1.0 has a dual greed/red LED along the edge
|
||||
towards the USB connector end of the board. This
|
||||
indicates battery charging status while connected to
|
||||
power over USB. When the red LED is lit, the battery
|
||||
is charging. Once the battery is fully charged, the
|
||||
red LED goes out and the green LED turns on. If both
|
||||
LEDs are lit, something is probably wrong with the battery.
|
||||
|
||||
TeleGPS v2.0 has the same green/red battery charging
|
||||
status LED and adds another green LED along the same
|
||||
edge, towards end of the board with the 70cm
|
||||
antenna. This green LED indicates GPS lock status — it
|
||||
blinks once every three seconds when the GPS receiver
|
||||
is locked and tracking position.
|
||||
|
||||
=== Installation
|
||||
|
||||
The battery connectors are a standard 2-pin JST
|
||||
connector and match batteries sold by Spark Fun. These
|
||||
batteries are single-cell Lithium Polymer batteries
|
||||
that nominally provide 3.7 volts. Other vendors sell
|
||||
similar batteries for RC aircraft using mating
|
||||
connectors, however the polarity for those is
|
||||
generally reversed from the batteries used by Altus
|
||||
Metrum products. In particular, the Tenergy batteries
|
||||
supplied for use in Featherweight flight computers are
|
||||
not compatible with Altus Metrum flight computers or
|
||||
battery chargers.
|
||||
|
||||
[WARNING]
|
||||
Check polarity and voltage before connecting any
|
||||
battery not purchased from Altus Metrum or Spark
|
||||
Fun.
|
||||
|
||||
TeleGPS uses an integrate GPS patch antenna and won't
|
||||
receive GPS signals if installed inside a metal or
|
||||
carbon fiber compartment. Test GPS reception and
|
||||
telemetry transmission with the system installed and
|
||||
all other electronics powered up to verify signal
|
||||
reception and make sure there isn't any interference
|
||||
from other systems.
|
||||
Reference in New Issue
Block a user